Home > Won 39 T Boot > Will Not Boot From SSD When Attach Additional HDDs

Will Not Boot From SSD When Attach Additional HDDs

Contents

permalinkembedsavegive gold[–]Spawn3323[S] 0 points1 point2 points 1 year ago(3 children)OK I will try. do I need to repartition the hdd or? I got mine with attached 3 USB3.0 slots. And I've never had anything like this happen. http://voipforisp.com/won-39-t-boot/unable-to-boot.php

Otherwise, it's an MBR drive.Enlarge ImageIt's easy to convert a drive from MBR to GPT and vice versa.Photo by Screenshot by Dong Ngo/CNET And here's how to make sure the SSD See if there are any updates for your mobo and install all the correct drivers (that's if it successfully goes into windows). The computer needs to be running Windows 7, 8 or 10. This thread is a bit dated from when I first started it, but since then I ended up upgrading my power supply and haven't had issues anymore.

Windows Won't Boot With Second Hard Drive

It's quite happy if I use a second power cable for the 4th. The limitation may be on the storage amount per se rather than the number of drives. When I changed the boot order in BIOS the PC wouldn't start giving a NTLDR error. Ssd (windows) 2.

I've never had issues with power outages until now. You won't be able to vote or comment. 202122PC will not boot from SSD after installing a second hard drive. (self.buildapc)submitted 1 year ago * by Spawn3323I need some help. BIOS refuses to boot from main SATA HDD after installing second SATA HDD solved PC doesn't boot after installing new ram How to insert a second hard disk sata on my Installed New Hard Drive And It Wont Boot Windows 8 should have used it by default, while 7 only supports legacy, so by setting the BIOS to use only UEFI mode, it shouldn't try to boot from the HDD

Then, if the problem still occurs, you could try resetting the CMOS battery and check if you need to update your BIOS. Installed New Hard Drive Windows Won't Boot Also, windows will probably bitch about the motherboard-switch, USAFRetFeb 11, 2016, 12:21 AM Installing the OS, with 2 drives connected, very often the boot partition ends up on 'the other drive'.Take Previous versions of Windows don't support SSDs very well. Planet Vanishes - How does this affect the orbiting starships?

Windows 7 Help Forums Windows 7 help and support Installation & Setup » User Name Remember Me? Ssd Won't Boot After Clone This new build has all brand new physical components with the exception of the SSD boot drive with windows on it. Installed Windows 7 and would run fine. Especially if the new board is very different from the old one.

Installed New Hard Drive Windows Won't Boot

aeternum91Feb 15, 2014, 5:31 AM I swapped the SATA cables around and even tested them with both SATA 2 and 3. http://www.tomsguide.com/answers/id-2980020/ssd-replaced-hdd-boot.html It doesn't look like one specific drive, just all thee (4 with Ssd). Windows Won't Boot With Second Hard Drive then pick the SSD, which is connected to the computer via an USB port. Computer Won't Power On With Hard Drive Plugged In I moved my WINXP OS to HDD 1, and installed a bran new empty HDD 0.

But as this is before, as far as I understand, Windows even starts loading properly I'm wondering if this would actually have any effect, as it boots with the HDD in Get More Info Also, I looked at the SSD with a partition editor and it is missing the 100MB recovery partition that is usually the first partition on a Windows 7 boot drive. –Pedro_Uno But once it started, it stayed running. So I assume it is not set to UEFI? Computer Won't Boot From Ssd

USAFRetFeb 11, 2016, 12:23 AM Secondly, just moving a drive over to a new system (motherboard) with the original OS often (but not always) has issues.Clean install with the new hardware It has two internal hard disk drives, HDD 0 and HDD 1. Any ideas? useful reference All Rights Reserved Tom's Hardware Guide ™ Ad choices Articles & News Forum Graphics & Displays CPU Components Motherboards Games Storage Overclocking Tutorials All categories Chart For IT Pros Get

Is the SSD on port 0? Ssd Won't Boot Windows 10 ignatzatsonic View Public Profile Find More Posts by ignatzatsonic 14 Feb 2012 #3 dukee123 Windows 7 Home Premium 32bit SP1 8 posts My big issue was getting everything I hope it continues, because I don't feel like buying and changing the power supply at this point.

In an act of desperation I did plug one of the HDD into the sata power while the computer was running just to see what would happen, and it shut the

So I have put in my windows 8.1 dvd and it says something like "Drive locked, please unlock and try again". sofaMonsterApr 29, 2013, 6:28 PM Hi!Have you tried turning in on and off? For a motherboard change, you really need to reinstall the OS.And do this with only the target drive connected. Installed A New Hard Drive Now Computer Won't Turn On On boot bios both drives were showing and I selected boot priority as DVD drive > SSD > HDD and booted it up.

Is there something I'm not thinking of? 2 answers Last reply Nov 29, 2015 More about computer boot attach additional hard drives jsmithepaNov 25, 2015, 7:21 PM Simple. The setting in basic mode doesn't seem to be 100% effective permalinkembedsavegive gold[–]Spawn3323[S] 0 points1 point2 points 1 year ago(3 children)Can you take a look for me and find the option. PC wont boot when I connect second hard disk After installing Second Hand GPU PC wont boot Pc doesn't always boot with second hard drive plugged in PC doesnt boot after this page I connected the second HDD to another connector (a molex connector) using a molex/sata adapter.

To quickly find out the best options, check out my current list of best SSDs. Your +12V is normally split between what called rails, And the +12V rail you are using is just not enough for the 2 HDDs and what ever else is on the You are also trying for 6 TB total storage. The steps on this post are done with Windows 10, which you should upgrade to soon, since the free upgrade offer ends July 29.

Hope this works! I physically installed it inside the second HDD tray (making sure to ground myself and unplug the power cable). The computer turned on and Windows 7 booted correctly! If a drive is listed with an asterisk (*) under the GPT column, then it's using GPT.

You will see a list of drives currently installed in the system. About CNET Privacy Policy Ad Choice Terms of Use Mobile User Agreement Help Center CNET © CBS Interactive Inc.  /  All Rights Reserved. Since the install detects a boot drive, it will do the install, using the boot sector on the old drive.

Everything works with my SSD alone but nothing works with my HDD attached.. Your old PC has been booting this way all along without you even realizing it, until you separate the old drive, and the new drive, now suddenly, you dont have the All rights reserved.REDDIT and the ALIEN Logo are registered trademarks of reddit inc.Advertise - technologyπRendered by PID 14948 on app-512 at 2017-01-11 09:00:50.856547+00:00 running 35e3b26 country code: DE. Stalled on boot, looking for boot disk in DVD.

I bought a 2TB drive and installed it. For a desktop, you actually can still use the old hard drive as a secondary drive if there's a place for it inside the computer's chassis.