Home > Windows 7 > BSOD After Switching Sata Port

BSOD After Switching Sata Port

Contents

no hardware was changed, added, etc. However, in this case, the AHCI drivers (Intel ICH9R/DO/DH) would not install. Angel Ftd Thank you, It works for me. Try changing from ACHI to IDE under BIOS, then see if you can boot to safe mode. Check This Out

I also tried injecting the correct drivers with Paragon P2P Adjust (which does NOT recognize AHCI as a driver to add on 2 systems I tried). Has anyone ever seen this behaviour? Marcel Brown Wow! Posts: 528 Rep: 10 (Unique: 8) Folding Team Rank: 1,013 Name Team Rank Points / Jan Work Units / Jan Noosh 1,013 3,826,229 / 0 1,232 / 0 Select their explanation

Ahci Blue Screen Windows 7

Seems that leaving it on is a major problem for dual boosters. Marcel Brown I'm not sure this would have any effect on the particular issue. With my new SSD loaded with Win 10 goodness, I realised I was still operating it in IDE mode.

So, there is inherently a port switch every time I change drives. #16 corkyg, Apr 9, 2012 Last edited: Apr 9, 2012 taltamir Lifer Joined: Mar 21, 2004 Messages: 13,575 solved I had AHCI enabled before installing Windows, but the PC boots up in IDE solved New Motherboard IDE TO AHCI solved Help me, I ruin my HDD by change from Not a measurable difference to be found. #19 thelastjuju, Apr 9, 2012 El Norm Senior member Joined: Oct 29, 1999 Messages: 515 Likes Received: 0 Just swap the port, if Blue Screen Ahci Does your BIOS say AHCI as the configuration ?

chuck_2012 after formatting and reloading windows to take care of a partitioning problem I then tried the use the MS patch to set the appropriate things in the registry. How To Repair Windows 7 After Changing Motherboard Restart the computer again and change the SATA operation to AHCI in BIOS. OS Kubuntu 12.10/Windows 8 CPU Intel Core i7 2600K Motherboard MSI P67A-G45 Memory 2x4GB Crosair Dominator Graphics Card Saphire 4890 Vapor-X Monitor(s) Displays Dell 2208WFP Screen Resolution 1680x1050 Mouse Mionix NAOS http://www.overclock.net/t/1197894/solved-please-help-bsod-after-changing-mobo Glasguy Big thank you !

I only have 1 drive and and optical drive. Ahci Mode Blue Screen Ssd I used the driver update previous to it. For starters, what was the question that you said yes to? I'll proceed to making the changes now and report back after.Thank you!

How To Repair Windows 7 After Changing Motherboard

Hardware & Devices Switching BIOS SATA RAID/AHCI setting causes BSOD at Windows StartI just changed my disk setup from: 1 SATA HDD Primary OS Disk 2x SATA HDD Backup Disks in Tt eSports is a division of Thermaltake dedicated to bringing out the most personalized and... Ahci Blue Screen Windows 7 All vendors support only that solution. Enabling Ahci In Win 7 After Installation However, I need to transfer data from one 3TB SATA 3 HDD to another 3TB SATA 3 HDD.

UpdatedQuote: Originally Posted by Davayy  Have you tried resetting cpu, booting with 1 stick ram etc? http://voipforisp.com/windows-7/windows-7-ulitmate-64bit-sata-problem.php tikz path of \textheight spills over page Is there a word for discontent with the present in favor of the past? So, there is inherently a port switch every time I change drives.Click to expand... Yes, my password is: Forgot your password? Change Motherboard Without Reinstalling Windows 7

Might run into unmountable boot volume BSODs if the controller vendor and driver is different if not using a generic MS SATA/AHCI driver. They drive is the exact same speed on both #9 taltamir, Apr 8, 2012 Coup27 Platinum Member Joined: Jul 17, 2010 Messages: 2,125 Likes Received: 2 HDDs advertised as SATA My System Specs You need to have JavaScript enabled so that you can use this ... this contact form My System Specs You need to have JavaScript enabled so that you can use this ...

I can access the Win 7 drive through... Ide To Ahci Windows 7 Worked for me flawlessly (much to my surprise). now I can't get back to Enhanced mode because whenever I try to change back to Enhanced mode ,it makes windows to raise BSOD...

RAM - Test with Memtest86+ Added : I'd personally remove the Advance SystemCare from Iobit using RevoUninstaller How to Remove Advance SystemCare 1) Double click the Advance SystemCare inside RevoUninstaller 2)

Luckily, after much research, I found a procedure that allowed me to install the SATA AHCI drivers without reinstalling Windows 7. I have booted back and forth several times now with no problems. TRIM is a ATA command from the OS so it will work in IDE or AHCI with Windows 7.... Switch From Ide To Ahci Windows 10 Chris Pardon the slightly belated response - it results from my primary computer temporarily dying last week. (Easy fix involved, but I'm lazy.) My 2nd computer's SSDs had been installed incorrectly

Had to resort to nuclear option and re-install Windows. Windows 7 Help Forums Windows 7 help and support BSOD Help and Support » User Name Remember Me? Can anyone tell me what's it about? navigate here Oh and can you update your sig rig?

Another thing is my hdd comes up as the boot device but when I get into bios it's gone. Going from IDE to AHCI on SSD - Windows 10 solved IDE to AHCI - Warning after BIOS Mistake: Run AHCI hdd in ide mode solved SATA III ports each 6Gbps?