Home > Windows 10 > Second Monitor Stuck At 1024x768 After Reboot

Second Monitor Stuck At 1024x768 After Reboot

Contents

Reports: · Posted 4 years ago Top pandemonium17 Posts: 38 This post has been reported. @Lighthouse Unfortunately I can't roll back the driver of the monitor Reports: · Posted I had the same issue on a Lenovo 2440 and used the Vista .inf.Good Luck! ive checked different cables, and even other monitors (the other monitors tested were the same brand and model however) and same issue. Once it came back up, my second monitor, a Monoprice, showed as a generic Non-PnP monitor, and won't go above 1024x768 in resolution. http://voipforisp.com/windows-10/screen-resolution-suddenly-limited-to-1024x768-and-under.php

Apr8,2016 •#28 HI im having same issue i had dual monitors running fine on windows 10 then i installed new ssd and now my second monitor wont detect at all. Once i unchecked that, i went back into windows display properties and the option for the correct resolution was available. Essentially, the HDMI output to my second monitor connects to the motherboard of my PC. I figured I had to manually update something somewhere but I don't see an xorg.conf (and from what I've read, there isn't one) so I'm not sure how to manually set

Resolution Stuck At 1024x768 Windows 10

Like I said, it has been working fine for over a year now.  I shutdown my laptop on Friday and power it backup on Monday, I did not use the laptop Also, when in the recommended resolution of 2048x768 I get the message "1:Analog Input Cannot Display This Video Mode. I copied most of the rows in the xorg.conf that you had put in the post you linked to. now, a few months later i suddenly had a problem with the laptop's original screen-it was stuck dim.

I checked if this worked for me but I noticed that my resolution changes when I turn ON my TV instead of turning it off. I right clicked on the driver. Solution. Can't Get Higher Resolution Than 1024x768 Windows 7 Feb12,2016 •#21 I have 2 asus monitors and I have been having really bad trouble with connecting my second monitor after the windows 10 update.

Crazy how Windows doesn't update your drivers when it upgrades to Windows 10. After a few minutes of updating the primary screen switched to white noise again. Source. try this Check it out: github.com/TomONeill/persistentdesktopicons –Tom Nov 17 '16 at 22:40 add a comment| up vote 3 down vote Your hunch is correct; the monitor is essentially shutting off the handshake on

I have gone into Screen Resolution->Advanced and Windows 7 simply refuses to pick up the monitor. Increase Screen Resolution Past Max During boot up, both monitors show the bios, they even both show the windows loading swirl. I'm having the same problem. Crazy!

Windows 10 1024x768

nvidia delayed drivers for that series. check it out If resolution is changed and changed back, then it restores same sizes and positions! Resolution Stuck At 1024x768 Windows 10 its also connected to the DVI port if that maybe helps with the issue. Can't Get Higher Resolution Than 1024x768 Windows 10 Read and click Next again.

I already tried system restore, and it didn't help either. news I have the proper Intel video driver installed and I know the monitor supports more - why can't I set a higher resolution and how do I fix it? It had been displaying the same screen on both monitors but every time I clicked 'Detect' it told me that it couldn't detect a second monitor. solved UEFI does not detect second SSD after Windows 7 reboot, ASRock 970 Pro3 R2.0 MB solved Desktop stuck in Hibernation mode after reboot. Resolution Locked Windows 10

Get the answer Ask a new question Read More Monitors Related Resources solved how to keep icons to stay on second monitor after reboot solved Just built computer and monitor resolution I thought it wouldnt be possible for me to play any games in any resolution if my video card was dead. Windows Insiders - dedicated to Windows Insider program, WI builds troubleshooting. have a peek at these guys Trying to stay vga (ya i know old school) but for use that's what's available right now where i'd be trying to go dual display.

Now it works! Screen Resolution Stuck At 640x480 Windows 10 Well for some reason it is using the wrong driver. Thanks alot Ryanssuperman!!

The resolution will no longer switch when the TV/monitor is turned off.

Removing the drivers completely defaults windows to VGA drivers. Windows Mobile - dedicated to Windows Mobile OS and discussions about it. Each my themselves no issue. Windows 10 Resolution Greyed Out Restarting fixed it - I assume the initial launch uses some windows GPU driver for some reason.

Can you predict a number that is "randomly" chosen by a person better than chance? The ease of use and system functionality seems much smoother on Macs. Report back Reports: · Posted 4 years ago Top pandemonium17 Posts: 38 This post has been reported. http://voipforisp.com/windows-10/reboot-update-loop-after-repair.php At this stage it was unclear whether it was my graphics card or my monitor at fault or indeed Windows.

Even though i have the HP driver installed for my monitor, the native resolution is 1920x1200 and it would only let me go to 1600x1200. I noticed that if you minimize windows before the display is powered off and do not restore them until the display has returned, then the windows are not rearranged. Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection xorg kubuntu kde share|improve this question edited Oct 27 Basically, it isn't detecting the second monitor at all.

Previously i was able to duplicate the display from my laptop to the TV screen using a HDMI cable (both laptops could do it). both monitors were detected and operating just as they had been with Windows 8. build info incase that helps someone figure my issue easier i7 6700k MSI z170a MB EVGA GTX 970 FTW edition. This will display 1 + 2.

another problem at that resolution is that there is about a quarter of the screen not visible between the two monitors. I have my laptop plugged into my tv with a hdmi cable so I can watch tv on on a bigger screen with better sound. currently using vga for main monitor and second screen has dvi. I have an nVidia 760, and I removed and reinstalled the latest drivers, with a clean install (an option on the nVidia installer).

Thursday, June 10, 2010 6:55 PM Reply | Quote 0 Sign in to vote Okay, none of the above has worked for me while my problem seems to be quite similar. I can't believe it was this simple. Everything was working fine then suddenly windows / nvidia didn't recognise my monitor as HP reset it back to Generic Non PNP and changed the resolution down which made it quite I have tried plugging the 2nd monitor into the other ports ( I am running duel GTX 570's) and nothing worked.

Somebody stop me! I didn't have to change anything myself. To get the correct monitor specs, see this current conversation: http://ubuntuforums.org/showthread.p...1#post10407731 Improve the Look of Ubuntu Forums | AWN Install/Setup Script | Ubuntu/Linux Resources Please mark your thread as [SOLVED] when I also updated the driver in "Monitors" as well.

permalinkembedsaveparentgive gold[–]robocop019 1 point2 points3 points 1 year ago(0 children)It's under Windows System in the start menu permalinkembedsaveparentgive gold[–]Lord_of_Lurkers 4 points5 points6 points 1 year ago(2 children)I was having this problem and already had the Reports: · Posted 4 years ago Top Lighthouse Posts: 13598 This post has been reported. Tq Jun13,2016 (modified Jun30,2016) •#42 Windows 10 is a virus that wrecks perfectly working old computers and microsoft and the computer manufactures are profiting from it. Any Thought any one thanks Jun30,2016 •#47 the fix for this for me was found when I completed Windows Updates, drivers were re-installed and my dual monitors came back!!!