Home > How To > Drive Matching For Mirroring [RAID 1] In Ultimate X64

Drive Matching For Mirroring [RAID 1] In Ultimate X64

Contents

Of Course, all newer motherboards have two IDE busses, so you can set up two disks in RAID without buying more controllers. Instead of completely mirroring the information, it keeps parity information on one drive, and writes data to the other disks in a RAID-0 like way. I have a very fast 640gb barracuda drive from a few years back I want to use and thought I would try to match it up with one off ebay or Introduction 1.1 Disclaimer 1.2 What is RAID? 1.3 Terms 1.4 The RAID levels 1.5 Requirements 2. http://voipforisp.com/how-to/what-are-raid-setup-and-sata-drive.php

Method 1 This method assumes you have a spare disk you can install the system on, which is not part of the RAID you will be configuring. The disks does not have to be of the same size. RAID-1 can be used on two or more disks with zero or more spare-disks. RAID-5 can be used on three or more disks, with zero or more spare-disks.

How To Setup Raid 1 Windows 10

The reconstruction process is transparent, so you can actually use the device even though the mirror is currently under reconstruction. The array is still usable in the meantime. There are no other special requirements to the devices from which you build your RAID devices - this gives you a lot of freedom in designing your RAID solution. Using mdadm to monitor a RAID array is simple and effective.

Initial steps to do, 1) Image the old 32GB harddisk 2) Mirror the two new 72GB harddisks into Raid 1 3) Restore the image to one of the 72B harddisk then This is described in the Autodetection section. 5.10 Chunk sizes The chunk-size deserves an explanation. See the section on special options for mke2fs before formatting the array. Windows 7 Raid 1 This option is not available "New Mirror Volume" when right click on the disk?

Since you can change the block group size in steps of 8 blocks (32k), using a block group size of 32760 solves the problem. How To Setup Raid 0 For example, Personalities : [raid1] read_ahead 1024 sectors md5 : active raid1 sdb5[1] sda5[0] 4200896 blocks [2/2] [UU] md6 : active raid1 sdb6[1] sda6[0] 2104384 blocks [2/2] [UU] md7 : active Don't put the failed-disk as the first disk in the raidtab, that will give you problems with starting the RAID. https://answers.microsoft.com/en-us/windows/forum/windows_7-security/can-bitlocker-be-used-to-encrypt-mirrored-disks-in/b8b77c21-ea51-415e-9987-1b89ff308d4d For optimal performance, you should experiment with the value, as well as with the block-size of the filesystem you put on the array.

However, the chunk-size does not make any difference for linear mode. How To Setup Raid Windows 10 If that happens, you will see a performance gain. Even today, the warranty on IDE drives is typically one year, whereas it is often three to five years on SCSI drives. Now you've seen how it goes when a device fails.

How To Setup Raid 0

The howto was originally written by Jakob Østergaard based on a large number of emails between the author and Ingo Molnar ([email protected]) -- one of the RAID developers --, the linux-raid There has been a lot of discussion about whether swap was stable on RAID devices. How To Setup Raid 1 Windows 10 These numbers are found in the "/proc/scsi/scsi" file. How To Setup Raid 0 Windows 10 It offers no boost in performance or redundancy and is a holdover from the days when smaller disks had to be chained to handle large amounts of data.

Since a Linux Software RAID device is itself a block device, the above implies that you can actually create a RAID of other RAID devices. http://voipforisp.com/how-to/how-to-skip-windows-login-screen-on-win-7-ultimate.php Put a filesystem on the new array (using mke2fs), and mount it under /mnt/newroot Now, copy the contents of your current root-filesystem (the spare disk) to the new root-filesystem (the array). Better safe than sorry. 1.2 What is RAID? At all times the letter N is used to denote the number of active disks in the array (not counting spare-disks). Windows 10 Raid

Windows 7 Home allows JBOD and RAID 1 while Professional and Ultimate add RAID 0 mirroring. I simulated a drive failure while using the mirrored volume and I was able to continue working on files; accessing them and saving them. But you may just as well end up with a fried IDE controller, and you'll be looking at a lot more down-time than just the time it would have taken to have a peek at these guys The above steps have been tried and tested on a system with IBM SCA disks and an Adaptec SCSI controller.

Furthermore, some of the newer IDE drives come with a restriction that they are only to be used a given number of hours per day. Windows 7 Raid 0 Both the patches and the tools can be found at http://people.redhat.com/mingo/. What he wants you to do is break the mirror, rebuild it onto one of the bigger hard drives, break the mirror again, and rebuild it onto the second bigger hard

This is usually the main reason for running RAID-0.

General Discussion Raid+windows mirroringI recently had some raid problems when my 2 drives suddently dropped out of raid 0. They are used for old-style RAID, and has no use in new-style RAID with autodetection. A "device" in the following text simply refers to a "Linux block device". Windows 7 Raid 5 However, this would require that the filesystem on which /etc/raidtab resided was mounted.

What is interesting is that Windows will not inform you that the array in an unhealthy state (at least, it never told me...); you wont know until Windows is restarted. When you For reads however, the chunk-size specifies how much data to read serially from the participating disks. Some RAID levels will make your systems immune to data loss from single-disk failures, but RAID will not allow you to recover from an accidental "rm -rf /". check my blog A search on FreshMeat should return a good number of matches. 7.

Have a look in /proc/mdstat to see what's going on. On a single disk, that does not matter, but it can hurt RAID0, if all block groups happen to begin on the same disk. However, disk arrays can be made fault-tolerant by redundantly storing information in various ways. Back up all your data before experimenting with this.

Check your PC or motherboard documentation to find out if your motherboard supports RAID (and if so, which levels), and for specific installation instructions.If your PC doesn't have integrated RAID, you Related tools 10.1 RAID resizing and conversion 10.2 Backup 11. Set up the /etc/raidtab file like this: raiddev /dev/md0 raid-level 4 nr-raid-disks 4 nr-spare-disks 0 persistent-superblock 1 chunk-size 32 device /dev/sdb1 raid-disk 0 device /dev/sdc1 raid-disk 1 device /dev/sdd1 raid-disk 2 Learn more about this here. PCWorld PCWorld helps you navigate the PC ecosystem to find the

Update /mnt/newroot/etc/lilo.conf to point to the right devices. Ok, now when you have your RAID device running, you can always stop it or re-start it using the raidstop /dev/md0 or raidstart /dev/md0 commands. Linear- or RAID-0 will fail completely when a device is missing. Write performance is often worse than on a single device, because identical copies of the data written must be sent to every disk in the array.