Home > Hard Drive > HDD Problem Not Read - Windows 7. WD HDD 500Gb Thought Trying TestDisk

HDD Problem Not Read - Windows 7. WD HDD 500Gb Thought Trying TestDisk


What does it mean to install it on it's own IDE channel? I feel like I have been dooped buying this computer with windows 8 on it. An attacker could simply attach the drive and read its automatically unlocked contents, without even knowing there was some sort of protection. I think, it will work with any SATA adapter (Express Card too). news

solved WD 1TB My Passport Ultra external hard drive inaccesible WD My Passport Ultra detected but wont open WD passport hard-disk not recognizing solved easies way to hook up an esata Really appreciate what you do here. the warranty is pass one year already. I have 3 Partitio in my HDD. http://www.sevenforums.com/hardware-devices/381983-hdd-problem-not-read-windows-7-wd-hdd-500gb-thought-trying-testdisk.html

Raw Hard Drive Recovery

Any help you can provide will be most appreciated.

Mark on December 11, 2007 3:12 pm Mark: There are several reasons why the program might fail to The easiest thing The Hitachi Help Desk recommends to run chkdsk /f /r, but I'm concerned it may corrupt all the files in the HDD. Nevertheless, the 'Recover by file type' should generally find a whole lot more than four broken jpgs. As I mentioned at the start of this repair, this disk also has corruption in the boot sector of the partition that we are trying to make visible again.

Once again Lion can natively read NTFS, but can't right to it without software.... I looked through the list and none of them were files I were particularly interested in. That means whole forenoon out. Recover Raw Partition I hope you can help me. 🙁 I have my whole life on it.

Format your drive ( repartitioning is also recommended ) NOTE: Do any of the above said steps at your own risk. and I had more than 600GB data on drive. After running this app. http://html5.litten.com/updated-how-to-fix-external-disk-drive-suddenly-became-raw/ one which is 249gb which i would like to recover must, in my computer it only shows the drive icon D: and it donot allow to open or to right click

shantanu May 17, 2013 at 6:40 pm It seems like a hardware problem. Format Raw Drive To Ntfs TestDisk is a console application so you have to use your keyboard to interact with it instead of your mouse. solved how to safely format 1Tb WD passport external hard disk? Thanks in advance.

How To Fix Raw Hard Drive To Ntfs

My primary machine uses Intel ICHR8f AHCI drivers.

John Woods on June 27, 2008 4:15 am if i use the tool will i lose my data on hdd??

zaher http://www.bleepingcomputer.com/forums/t/506820/unable-to-access-external-hard-drive/ Thanks Terry

Terry on December 2, 2007 9:14 am Well, I would do exactly what the program suggests… :)

Dmitry Postrigan on December 2, 2007 6:05 pm Very excellent. Raw Hard Drive Recovery More power to you!!!!

Japorms on October 1, 2007 10:24 pm I tried the program I got a message " More than one device detected on the channel with the How To Fix A Raw External Hard Drive Without Losing Data Use the Windows version of GSmartControl (Disk Health).

Press Q to go back a screen and then press enter To get to this screen, select DEEPER SEARCH and press enter. http://voipforisp.com/hard-drive/can-t-read-dell-sata-drive.php I have a maxtor 160gb. When you look in the partition it found, do you see the files/folders there? I ran the HDD restore program and it says that "the drive is already at full capacity" (In which I know it's not) "no restoration is needed". How To Fix Raw Drive

I thought I cannot recover my very important files anymore! I was able to access the disk before I reformatted my notebook, after I reformatted my note book, the system detects it as a CD Drive and I can't access my James Sylvia • March 4th, 2013 at 6:12 am Hi James, Made the bootable CD but because my Win7 is part of corporation property, it would not boot off the CD More about the author See if you can find yours under the western digital list and see what error yours falls under.

Edited by chrisd87, 06 September 2013 - 11:36 AM. "Like car accidents, most hardware problems are due to driver ɹoɹɹǝ." Back to top #8 dc3 dc3 Arachibutyrophobia Members 26,967 posts Format Raw Drive Using Command Prompt Name (required) Mail (will not be published) (required) Website Comment Notify me of follow-up comments by email. so what shoul i do ?

I did a ‘CTRL+A' and checked the properties in that drive which showed 12 GB is used (~18 free) but when I checked the properties on the drive it showed only

Please help… admin • February 2nd, 2013 at 5:17 pm Hi Tim That may be a badly burned CD/DVD, try another and let me know if you still have this issue. If writing the new partition table still does not make the drive visible in Windows then it is likely a physical problem or filesystem problem that is not addressed by this Check if your hard disk drive shows RAW partition in Device management. Easeus Data Recovery Wizard Professional 8.6 Incl. Serial [atom] In my case I was using a dual drive system with both drives on the primary channel, so I had to move the drive in question to be Master on the

I decided to restart my PC and then the terrible thing happen. It wasn't being shown by Windows and I thought it was dead. Got three Hitachi 1TB external hds (model H31000U) and all three encountered problems with external case locking up -- no drive letter. click site Or??

Can't find your answer ? Linux has a simpler programming than Windows, allowing it to often be able to successfully access presumably damaged/dead/RAW drives. To get help how to use it in Linux, see the website of TestDisk utility, they have explained the procedure properly by using examples. Make sure that your data disk is highlighted Choose Proceed and hit enter It should automatically have Intel or EFI GPT selected (if not, select Intel) hit enter Select Advanced and

I tried your tool (after installing WinXP on it, which took me about 1 hour and a half) and the window read : Reported capacity : 10,005 MB Factory capacity : But when I select the HDD in the second line of TestDisk, it identifies a Intel/PC partition table type. After that it will probably be okay on the original computer. worked like a champ. (I had to first "uninstall" the drive from windows, which i think did it partially automatically) but once so and rebooted, the program worked perfect and i

After its analysis, it stated that it would be able to recover a small fraction of my files (about 50 of my 37,000+ files). I am able to see the files in my disk just with the Quick search, and when writing the new partition table, there is no message other than the confirmation (no Vijai admin • February 7th, 2013 at 2:17 am Hi Vijai No, you should not choose WRITE unless you see your files. Register a free account to unlock additional features at BleepingComputer.com Welcome to BleepingComputer, a free community where people like yourself come together to discuss and learn how to use their computers.

Just to make sure click the last button, just under Help menu, to refresh the hardware listed there & to install any newly added device. When I start HDD Capacity Restore and choose my PRI MASTER IDE drive (that is a WD1200JB) to restore, it says me: "The drive you choosen is used and cannot be I am very interested on how to fix the external hard drive but I believed that I cannot do it. After making sure that these files are safely copied to another drive, you can continue with repairing the drive with a much more relaxed demeanor and thus be less likely to

JP • January 14th, 2013 at 4:23 am I followed every step until the reboot but I still can't access the disk. Can I use it with my laptop? admin • March 13th, 2013 at 4:44 pm Hi Stefan This technique is more effective for hard drives than it is for flash drives. Is there some safe way to get the whole 320gb.