Home > Bsod After > BSOD After Inserting New USB Flash Drive

BSOD After Inserting New USB Flash Drive

The first number in the bugcheck params is the number of the trap (8 = double fault, etc) Consult an Intel x86 family manual to learn more about what these traps I guess dell would just ask you to tell them what memory module you have and compare it to its old list of qualified memory. CPT Gray WolfJan 25, 2014, 2:14 AM johnbl said: no problem, that leaves you with putting your drive on another SATA port, and disconnect the cables and reconnect them to make Back to top #13 JohnC_21 JohnC_21 Members 16,063 posts OFFLINE Local time:04:10 AM Posted 14 June 2016 - 07:06 PM What did you use to create the bootable flash drive. http://voipforisp.com/bsod-after/bsod-after-hour-of-use.php

Click here to join today! When I try to update the driver in device manager, it says the driver is up to date. Else if kv shows a trapframe use .trap on that value Else .trap on the appropriate frame will show where the trap was taken (on x86, this will be the ebp Memory Desk1 8GB (1866) / Desk2 16GB (1333) / Laptop 8Gb DDR3 Graphics Card Desk 1& 2NVidia GTX 650 & Laptops on board Intel Sound Card Desk 1 & 2 -XONAR http://www.sevenforums.com/bsod-help-support/337324-bsod-after-inserting-new-usb-flash-drive.html

The most common cause of memory corruption is incorrect settings in BIOS for the memory timings and voltages.Then third party device drivers corrupting shared memory structures in the kernel of the It didn't save any of the new ones. I'm not using an SSD.My system is kind of outdated and a lot of BIOS setting are off limits, because Dell.If I had the money I would build a new computer, Help me to identify what is the problem.

Is your setting on Performance in the link I posted? Tech Support Guy is completely free -- paid for by advertisers and donations. Short URL to this thread: https://techguy.org/752090 Log in with Facebook Log in with Twitter Log in with Google Your name or email address: Do you already have an account? No, create an account now.

The errors you indicated would be cause by memory corruption. This website is a free, open, and dedicated community of Windows enthusiasts. This cleaned the disk, and it holds data, but I'm not sure if this is part of my problem. The workaround fix relies on the registry tweak below to change the drive letter that has been previously assigned to the mounted USB or FireWire portable mobile flash or hard disk

No, create an account now. But the "active" copy of usbehci.sys is still the KB976972 version (the cleanup operation only deletes obsolete security catalogs and obsolete copies in the repository--it never touches the "active" copies of I usually safely eject drives when I can, though. On most Intel-based boards there are 2-3 separate controllers in the back and one specifically shoddy one in the front that usually comes attached to the case.

BugCheck 19, {20, fffffa80081ec780, fffffa80081ecab0, 4330008} Unable to load image \??\C:\windows\SysWow64\Drivers\OADriver.sys, Win32 error 0n2 *** WARNING: Unable to verify timestamp for OADriver.sys *** ERROR: Module load completed but symbols could not http://www.techspot.com/community/topics/bsod-everytime-i-insert-a-flash-drive.155422/ or read our Welcome Guide to learn how to use this site. The most common cause of memory corruption is incorrect settings in BIOS for the memory timings and voltages.Then third party device drivers corrupting shared memory structures in the kernel of the tsharky87, Sep 21, 2008 #1 Sponsor SilentTim Joined: Sep 21, 2008 Messages: 15 Have you recently installed XP Service Pack 3?

Thanks! see here My System Specs Computer type PC/Desktop System Manufacturer/Model Number Own build (new) Desk1 / Asus ROG Win 7 / Desk2 1st build OS Desk1 7 Home Prem / Desk2 10 Pro But you must eject or unmount the flash drive before physically pulling it from the port or you have the chance of corrupting your data. I'm not using an SSD.My system is kind of outdated and a lot of BIOS setting are off limits, because Dell.If I had the money I would build a new computer,

I would suspect that the OS lost access to your drive. Join the community here. I'm at a loss as to what to try next.If you have any ideas, I would appreciate your thoughts. this page No, create an account now.

The system returned: (22) Invalid argument The remote host or network may be down. It is very possible one of them has failed. The c0000005 tells you what kind of Exception it was.

Register now!

Please give me the specs on your mother board as wellThanks CPT Gray WolfJan 24, 2014, 11:22 PM tachybana said: Try removing the Memory and see if that allows it to Arg3: fffffa80081ecab0, The next pool entry. ntoskrnl.exe? Pretty common issue with certain firmware conditions on solid state drives.

The Windows 7 SP1 USB Driver Bug (what it is and how to fix it) This was a bug that was first noticed by a member of this forum, burfadel, in I did, however, find that one of my usb drives had errors, but a chkdsk fixed that. Are all the flash drives you have tried the same size? Get More Info It found that all of the affected files were up to date.

I did this by following this howto http://hifiblog.com/past/2006/05/11...ou-dont-let-itunes-manage-your-music-library/ Part 2 of that tells you to do some manual changes of the iTunes library data structure so that it will know to In your case I would look at your hardware settings in the crash dump to get a clue as to the problem, then at the various drivers you have installed. However, there is a scenario where this would result in your USB2 (EHCI) controller becoming unsigned, which may result in all your USB2 devices being downgraded to USB1.1. Just FYI, I was not using the front-side port (I almost never do).

Well everything is as up to date is it can get. no drive access= no memory dump file and the error logs will also not have been created. (I have seen a system with plenty of memory go for 4 hours before CPT Gray WolfJan 24, 2014, 11:27 PM johnbl said: -most likely incorrect memory timings set in the BIOS. (check for correct voltage to the memory in BIOS) - also, make sure In this case, double click on each remaining registry key values to view its binary data.

I tried fixing... Pretty common issue with certain firmware conditions on solid state drives. Pretty common issue with certain firmware conditions on solid state drives. But then this bug bit me hard...

Ports on the front and back behave the same way.Even stranger is that an old flash drive (16MB) works OK, but the newer, larger ones (1, 2, 4 and 8 GB) It's just that Windows won't start. http://www.nirsoft.net/utils/usb_devices_view.html Back to top #3 dj505 dj505 Topic Starter Members 24 posts OFFLINE Local time:02:10 AM Posted 06 June 2016 - 08:52 AM Thanks for the quick reply! What is the impact of this bug?

This particular scenario happens when (1) you have KB976972 installed (this hotfix was distributed via Windows Update to anyone with a NVIDIA USB controller, such as people with nForce boards or I'll be back if there are more BSODs. The latest version at NEC is December 2010. : ) #8 cybercore, Apr 27, 2011 1 person likes this.